Home > ATEX Control Equipment>Start push button, ATEX zone 1
Start push button, ATEX zone 1 Maximize

Start push button, ATEX zone 1

Explosion proof ATEX start push button control unit. 1 gang standard control station, Start (green I) push button c/w 1 x normally open contact, IP66 glass fibre reinforced polyester enclosure, 1 x M25 cable entry. Explosion protection: Ex III 2GD, Ingress protection: IP 65, Ambient temperature: -20 ºC .....+40ºC, Cable entries: 1 x M25

More details

CS-001

Add to cart

13 Other products in the same category

Explosion proof ATEXstart push button. 1 gang standard control station, Start (green I) push button c/w 1 x normally open contact, IP66 glass fibre reinforced polyester enclosure, 1 x M25 cable entry. Atex hazardous area zone 1, zone 2, zone 21 and zone 22 certified explosion protection: Ex III 2GD, Ingress protection: IP 65, Ambient temperature: -20 ºC .....+40ºC, Cable entries: 1 x M25

ATEX approval details
Area classificationHazardous area  zone 1, zone 21, zone 2, zone 22, Ordinary
ATEX certificationEx II 2 D Ex tD A21 IP65 T80°C, T95°C, T130°C
 Ex II 2 G Ex edqm ia/ib [ia/ib] II, IIA, IIB, IIC, T6, T5, T4
  
  
Technical details: 
Enclosure materialPolyester resin, glass fibre reinforced
Rate voltageupto 690V – 50/60Hz
Rated current16A
Ingress protection:IP65 in acc. to IEC/EN 60529
Cable entries1 x M25 (bottom face)
GasketPU foam
Cover fixing screwscaptive M4 stainless steel socket head cap screw
Operating temperature-20°C to +40°C ambient (-50°C to +60°C upon request) 
Overall dimensionsLength 90mm x 80mm W x 85mm D approx.. (excluding cable gland)
Weight0.3 kg