Home > ATEX Control Equipment>ATEX Two Way Radios>Start / Stop push button control station, ATEX zone 1
Start / Stop push button control station, ATEX zone 1 Maximize

Start / Stop push button control station, ATEX zone 1

Explosion proof control unit - Start / stop push button, 2 gang, ATEX certified.  Atex certified 2 gang standard control station, start (green I) and stop (red) pushbuttons c/w 1 x normally open or normally closed contact, IP65 glass fibre reinforced polyester enclosure. explosion protection: Ex II 2GD, Ingress protection: IP 66, Ambient temperature: -20 ºC .....+40ºC, Cable entries: 1 x M25

More details

CS-101

13 Other products in the same category

Explosion proof ATEX start / stop push button control station unit.

  • 2 gang standard control station
  • Start (green I) push button c/w 1 x normally open contact and Stop (red O) push button c/w 1 x normally closed contact
  • Glass fibre reinforced polyester enclosure
  • Atex hazardous area zone 1, zone 2, zone 21 and zone 22 certified 
  • Explosion protection: Ex II 2GD
  • Ingress protection: IP 66
  • Ambient temperature: -20 ºC .....+40ºC
  • Cable entries: 1 x M25
 
 
ATEX approval details
  
Area classificationHazardous area  zone 1, zone 21, zone 2, zone 22, Ordinary
ATEX certificationEx II 2 D Ex tD A21 IP65 T80°C, T95°C, T130°C
 Ex II 2 G Ex edqm ia/ib [ia/ib] II, IIA, IIB, IIC, T6, T5, T4
  
  
Technical details 
  
 Actuator - top Momentary pushbutton with insert: Green "I"
 Actuator - bottom Momentary pushbutton with insert: Red "O"
Contacts 1 x normally open and 1 x normally closed
Enclosure materialPolyester resin, glass fibre reinforced
Rate voltageupto 690V – 50/60Hz
Rated current16A
Ingress protection:IP66 in acc. to IEC/EN 60529
Cable entries1 x M25 (bottom face)
GasketPU foam
Cover fixing screwscaptive M4 stainless steel socket head cap screw
Operating temperature-20°C to +40°C ambient (-50°C to +60°C upon request) 
Overall dimensionsH 140mm x  W 80mm x D 85mm approx.. (excluding cable gland)
Weight

0.5 kg