Home > ATEX Lights>Atex Emergency lighting>Atex Zone 1, Fluorescent Emergency Light, 2 x 18W 220...254 AC
Atex Zone 1, Fluorescent Emergency Light, 2 x 18W 220...254 AC Maximize

Atex Zone 1, Fluorescent Emergency Light, 2 x 18W 220...254 AC

FL series fluorescent emergency light suitable for surface mount in Atex rated hazardous area zone 1, zone 21 & zone 22. Dual electronic ballasts, single end through wiring, earth continuity plates and single point locking, double sided lock with interlock switch to prevent operation when opened. 2 x 18 watt fluorescent bi-pin lamp. Site set 1.5 or 3 hour 7Ah-NC 7 battery with LED display

More details

FL-21

3 Other products in the same category

Fluorescent fittings suitable for surface mount in Zone 1, with dual electronic ballasts, single end through wiring, earth continuity plates and single point locking, double sided lock with interlock switch to prevent operation when opened. Optional connection module for central monitoring systems. Explosion protection Gas: Ex II 2 G Ex de mb ib IIC T4, Explosion protection Dust: Ex II 2 D Ex tD A21 IP66 T80ºC, Ingress protection: IP66/67, Rated voltage AC 220....254V, Enclosure material: glass fibre reinforced polyester, Transparent cover material: polycarbonate, Polyurethane seal, 6 x 6mm.sq. terminals. Ambient temperature: -20 ºC .....+50ºC, Cable Entries: 2 x M25

 

Approval Details:
Area classificationHazardous area, Zone 1, Zone 2 (Gas), Zone 21, Zone 22 (Dust), Ordinary
 Ex II 2 G Ex de mb ib IIC T4 & Ex II 2 D Ex tD A21 IP66 T80°C
  
Technical Details: 
Enclosure materialglass fibre polyester resin
Cover materialpolycarbonate
Gasket materialpolyurethane
Ingress protectionIP66/67
Cable entries2 x M25 plugged
Operating temperature-25°C to +50°C ambient
Ballastdual electronic
Supply voltageAC 220 …254 V, 50/60 Hz
Charging duration> 14 h
Lamps holders2 x 18W  G13 to IEC 60081
Terminals6 x 6mm² 
Through wiringsingle ended
Overall dimensionsLength 900mm, width 210mm, depth 130mm approx..
Weight8.8 kg