nVent RAYCHEM gland kit C25-100-Metal Maximize

nVent RAYCHEM gland kit C25-100-Metal

nVent RAYCHEM C25-100-Metal cold applied metal connection kit is design for terminating all RAychem BTV, QTVR, XTV, KTV and VPL heat trace heating cables into a junction box whilst maintaining electrical insulation of the heating cable conductors and core. The Rachem C25-100-Metal is approved by Sira for ATEX hazardous area.

More details

4 Other products in the same category

The C25-100-Metal cold applied metal connection kit is design for terminating all RAychem BTV, QTVR, XTV, KTV and VPL heat trace heating cables into a junction box whilst maintaining electrical insulation of the heating cable conductors and core. The Rachem C25-100-Metal is approved by Sira for ATEX hazardous area.

In C25-100-Metal the braid of the heat trace heating cable is directly connected to the body of the metal gland. This allows the Raychem C25-100-Metal to be used with metal boxes or plastiic junctino boxes with internal earth wiring. 

The core sealing boot does not require a heat gun or touch for the installation (no hot work permit necessary). The non-curing sealant (silicone free) in the boot allows easy installation and facilitates maintenance. The Raychem C25-100-Metal kit is designed for use with M25 entries and a metal locknut is provided for earth bonding in plastic junctino boxes.

nVent RAYCHEM C25-100-Metal kit includes
1 xM25 x 1.5 gland
2 xgrommets
1 xlocknut and sealing washer (M25 only)
1 xcore sealer
1 xinstallation instructions

 

C25-100-Metal approvals
Area classificationHazardous area, Zone 1, Zone 2 (Gas), Zone 21, Zone 22 (Dust)
ATEX certificationSira 01 ATEX 1270X
ATEX markingEx II 2GD Ex d IIC Ex tD A21 IP68
 Ex II 2GD Ex e IIC Ex tD A21 IP68
 IECEx SIR 05.0020X
  
  
C25-100-Metal technical specification
Heating cable capabilityBTV-CR, BTV-CT, QTVR, XTV, KTV & VPL
Gland materialBrass
Thread sizeM25 x 1.5
Min. ambient temperature-60°C minimum
Weight0.31 kg