nVent RAYCHEM E-100-E trace heating end seal kit Maximize

nVent RAYCHEM E-100-E trace heating end seal kit

nVent RAYCHEM E-100-E End seal for termination of Raychem trace heating cable withiin ATEX hazardous area locations. The E-100-E is explosion proof and certfied for use in ATEX zone 1 and zone 2 hazardous areas. The Raychem E-100-E are accessible, re-entrable end seals that are pipe mounted and may be used with upto 100mm of insulation

More details

6 Other products in the same category

E-100-E trace heating end seal kit is designed and approved to terminate one Raychem self regualting BTV, QTVR, XTV, KTV trace heating cable or one Raychem power limiting VPL trace heating cable in industrial and ATEX hazardous area locations. The Raychem E-100-E is approved by PTB, FM and CSA, for use in hazardous locations.

E-100-E integrates the functions of both end termination kit and insulation entry kit. The rugged stand protects the trace heating cable and allows for up to 100 mm (4") of thermal insulation. The trace heating cable is kept firmly in place by the innovative strain relief.  Ingress protectection and sealing is achieved twice. First a dry compartment for the Raychem trace heating cable is create, then by a boot filled with non curring sealant (silicone free) placed over the end of the Raychem trace heating cable inside the compartment of the Raychem E-100-E.

The core sealing boot does not require a heat gun or torch for the installation (no hot work permit necessary). The non-curing sealant (silicone free) in the boot allows easy installation and  E-100-E end seals are mounted on the pipe and project through the insulation and cladding which facilitates maintenance.

 nVent RAYCHEM E-100-E kit includes
1 xE-100-E end seal
1 xcable tie
1 xpolywater sachet
1 xinstallation instructions
 E-100-E approvals
Area classificationHazardous area, Zone 1, Zone 2 (Gas), Zone 21, Zone 22 (Dust)
ATEX approvalsPTB 09 ATEX 1060 U
ATEX markingEx II 2G Ex e II
 Ex II 2D Ex tD A21 IP66
 IECEx PTB 09.0038U
 Ex e II
 Ex tD A21 IP66
 CSA – Ex e II T*
 DNV Certificate No E-8933 and E-8934
E-100-E enclosure details
Enclosure materialRugged moulded polymer 4mm thick, colour BLACK
Ingress protectionIP66
Solvent resistanceExcellent
Impact resistanceEN 60079-30-1, 7 joules
Operating temperature-50°C to +56°C ambient
  (extra conditions for safe use apply for ambient temperatures above +40°C)
E-100-E technical details
Heating cable capabilityRaychem BTV-CR, BTV-CT, QTVR, XTV, KTV & VPL trace heating cables
Entries1 via integral pipe stand
Installation temperature-50°C minimum
Max. operating voltage480 Vac
Max. continuous current40A heating cable circuit
Weight0.23 kg