Raychem E-100-LE end seal with LED Maximize

Raychem E-100-LE end seal with LED

Raychem E-100-LE End seal with LED indication for termination of Raychem trace heating cable withiin ATEX hazardous area locations. The E-100-LE is explosion proof and certfied for use in ATEX zone 1 and zone 2 hazardous areas. The E-100-LE are accessible, re-entrable end seals for trace heating that are pipe mounted and may be used with upto 100mm of insulation

More details

Add to cart

6 Other products in the same category

The E-100-LE trace heating end seal integrates the functions of both end termination kit and insulation entry kit. The rugged stand protects the trace heating cable and allows for up to 100 mm (4") of thermal insulation. The trace heating cable is kept firmly in place by the innovative strain relief.  Ingress protection of the E-100-LE trace heating end seal and sealing is achieved twice. First a dry compartment for the Raychem trace heating cable is created, then by a boot filled with non curing sealant (silicone free) is placed over the end of the Raychem trace heating cable inside the compartment of the E-100-LE.

The core sealing boot does not require a heat gun or torch for the installation (no hot work permit necessary). The non-curing sealant (silicone free) in the boot allows easy installation and  E-100-LE end seals are mounted on the pipe and project through the insulation and cladding which facilitates maintenance.

 E-100-LE kit includes
1 xE-100-LE trace heating end seal with LED indication lamp
1 xcable tie
1 xpolywater sachet
2 xspare crimps for BTV, QTV, XTV or KTV trace heating cables
2 xspare crimps for VPL power limiting trace heating cable
1 xinstallation instructions
  
E-100-LE Atex approvals
Area classificationHazardous area, Zone 1, Zone 2 (Gas), Zone 21, Zone 22 (Dust)
ATEX approvalsPTB 09 ATEX 1060 U
ATEX markingEx II 2G Ex e (e mb) II
 Ex II 2D Ex tD (tD mbD) A21 IP66
 IECEx PTB 09.0038U
 Ex e (e mb) II
 Ex tD (td mbD) A21 IP66
 CSA – Ex e II T*
 DNV Certificate No E-8933 and E-8934
  
E-100-LE Enclosure details
Enclosure materialRugged moulded polymer 4mm thick, colour BLACK
Ingress protectionIP66
Solvent resistanceExcellent
Impact resistanceEN 60079-30-1, 7 joules
Operating temperature-40°C to +40°C ambient
  
E-100-LE LED Light
LED typeGreen LEDs
Voltage rating range208-230Vac 50/60 Hz
Power consumption2 watt
EMC emissionsComplies with EN 50 082-2:1995,  EN 50 081-1:1991
Shock resistanceComplies with IEC 60068-2-7, 50g, 11 ms
  
E-100-LE Technical specification:
Heating cable capabilityRaychem BTV-CR, BTV-CT, QTVR, XTV, KTV & VPL trace heating cables
Entries1 via integral pipe stand
Installation temperature-50°C minimum
Max. operating voltage254V
Max. continuous current40A heating cable circuit
Weight

0.63 kg