nVent Raychem E-150 end seal kit Maximize

nVent Raychem E-150 end seal kit

nVent RAYCHEM E-150 cold applied under insulation low profile end seal kit for trace heating cable within ATEX hazardous areas zone 1 & zone 2. The E-150 trace heating end seal kit is explosion proof and certfied for use in ATEX zone 1 and zone 2 hazardous areas. The E-150 requires no heat source, with its rugged construction suitable for high temperature and aggressive chemical exposure

More details

6 Other products in the same category

The nVent RAYCHEM E-150 trace heating end seal kit is a cold applied low profile end seal designed and approved to terminate one Raychem self regulating BTV, QTVR, XTV, KTV trace heating cable in industrial and ATEX hazardous area locations. The Raychem E-150 is approved by PTB, FM and CSA, for use in ATEX hazardous locations zone 1, zone 2, zone 21, zone 22 and be used with temperatures ranging from -50°C to +215°C. 

The unigue design of the E-150 suits the demands of ATEX hazardous area locations and the industrial environments. THE low profile housing of the Raychem E-150 means the E-150 can be located on pipes or other surfaces under the thermal insulation. The Raychem E-150 has a spring loaded grommet which makes the first seal on the trace heating cable to maintain a water tight IP connection while the non-curing sealant (silicone free) placed over the end of the Raychem trace heating cable inside the compartment of the Raychem E-150 provides additional protection.

The rugged construction of the Raychem E-150 makes it resistant to impact ang suitable for high temperature variation and exposure to aggressive chemicals even within ATEX hazardous area locations. The Raychem E-150 end seal requires no heat source during for installation onto Raychem BTV, QTVR2, KtV or XTV self regulating trace heating cables, eliminating the need for hot work permits being issues, even in ATEX flameproof hazardous area locations. .

 nVent RAYCHEM E-150 kit includes
1 xE-150 end seal enclosure housing
1 xsealing grommet assembly
1 x core sealing boot
1 x identification label
1 xinstallation instructions
E-150 approvals
Area classificationHazardous area, Zone 1, Zone 2 (Gas), Zone 21, Zone 22 (Dust)
ATEX approvalsPTB 09 ATEX 1068 U
ATEX markingEx II 2G Ex e II
 Ex II 2D Ex tD A21 IP66
 IECEx PTB 09.0043U
 Ex e II
 Ex tD A21 IP66
 CSA – Ex e II T*
 DNV Certificate No E-8933 and E-8934
E-150 enclosure details
Enclosure materialRugged engineered polymers, colour BLACK
Ingress protectionIP66
Sealing grommetSilicone rubber
Core sealerSilicone rubber
E-150 technical details
Heating cable capabilityRaychem BTV-CR, BTV-CT, QTVR, XTV & KTV trace heating cables
Entries1 via silicone rubber grommet
Installation temperature-50°C minimum
Operating temperature-50°C to +215°C
Max. operating voltage277 Vac
Weight0.3 kg