20VPL2-CT power limiting trace heating cable Maximize

20VPL2-CT power limiting trace heating cable

Raychem 20VPL2-CT 61w/m output 230V power limiting trace heating cable for use in Atex hazardous areas Zone 1, Zone 2, Zone 21 (Gas) & Zone 22 (Dust) for temperature maintenance of pipes, tanks or vessels  which may be subjected to steam cleaning. Fluoropolymer outer jacket, withstands continuous temperatures up to +150°C (see schedule) and intermittent temperatures up to 260°C

More details

Add to cart

3 Other products in the same category

The 20VPL2-CT Raychem power limiting parallel circuit trace heating cable is suitable for use in Atex hazardous areas,  mostly used for temperature maintenance of pipe, tanks or vessels requiring high power output and may be subjected to steam cleaning. Raychem 20VPL2-CT may also be used in a variety of industrial applications for process temperature maintenance up to 150°C. It may also be used for frost protection of large pipes and applications requiring high temperature exposure capability. 20VPL2-CT may be overlapped once, cut to length and terminated on-site, which simplifies electric heat tracing designs for complex piping systems. Installation times are reduced due to state-of-the-art connection kits. When used in hazardous areas the temperature classification is established using the principles of stabilized design or by using a temperature limiting.

Technical Details:
Area classificationHazardous area, Zone 1, Zone 2 (Gas), Zone 21, Zone 22 (Dust)
Traced surfaced typeCarbon steel, stainless steel, plastic, painted or unpainted
Chemical resistance:Organic and corrosive solutions
Supply voltage208 - 230 Vac
ApprovalsBaseefa 06ATEX0188X
 Ex II 2 GD Exe II T* (see schedule) Ex tD A21 IP66
 IECEx BAS 06.0048X
 Ex e II T* (see schedule) tD A21 IP66 T80°C
 DNV Certificate No E-8095 for use on ships and mobile offshore units
Max. maintain temperature150°C at 208 & 230 Vac
Exposure temperature150°C at 208 & 230 Vac
Intermittent exposure260°C at 208 to 230 Vac (power off)
Temperature classificationEstablished using stabilizing design or temperature limiting device
Installation temperature-60°C minimum
Bend radius20mm at  20°C
 20mm at -60°C
Physical properties
Weight200 g/metre
Conductors2 x 3.3mm² nickel plated copper
Outer sheathFluoropolymer outer jacket
Power Output at 10°C61 w/metre at 230 to 277 Vac
Maximum circuit length based on type ‘C’ circuit breakers according to EN 60898
Electric protection sizeStart-up temperatureMaximum cable length 230 to 277 Vac
16A-20°C50 m
 10°C55 m
25A-20°C80 m
 10°C85 m
32A-20°C100 m
 10°C110 m
40A-20°C110 m
 10°C110 m