nVent RAYCHEM T-100 Tee connection kit Maximize

nVent RAYCHEM T-100 Tee connection kit

nVent RAYCHEM T-100 Tee or splice connection kit for Raychem BTV, QTVR, XTV, KTV and VPL industrial parallel trace heating cables for use in ATEX hazardous areas

More details

6 Other products in the same category

nVent RAYCHEM T-100 Tee  connection kit is an above insulation splice or tee kit designed for connecting up to three Raychem BTV, QTVR, XTv, KTV or VPL parallel trace heating cables in industrial locations. The Raychem t-100 is certified for use in ATEX hazardous areas zone 1, zone 21, Zone 20. and zone 22. The unique and rugged design of the Raychem T-100 protects the trace heating cable from mechanical damage by metallic or other weather protection systems and can be used on systems insulated with up to 100mm of thermal insulation. The core sealing boot of the Raychem T-100 does not require the use of a heat gun or torch during installation, therefore reducing the need for "hot work" permits in ATEX hazardous areas.  The non curing silicone free sealant in the sealing boot allows for ease of installation and facilitate maintenance.  The Raychem T-100 significantly reduces time and effort during both installation and maintenance routines in ATEX hazardous area locations.

The unigue design of the Raychem T-100 above insulation trace heating tee meets the demands of ATEX hazardous areas and industrial environments with features such as: 

  • direct installation on pipes or other surfaces
  • rugged housing which is resistant to impact, high temperature and chemical exposure
  • double moisture ingress protection via grommet and non-curing silicone free sealant 
  • access to cable connections through a re-enterable integral stand
  • no heat source required  


T-100 kit includes
1 xrugged engineered polymer enclosure and lid
1 xrugged engineered polymer standing with integral trace heating cable protection
3 xcore sealers for Raychem trace heating cable
3 xgreen / yellow earthing sleeve
3 xcompression crimps for trace heating cable conductors
3 xcrimp insulating tubes
1 xpolywater sachet
1 xspanner
1 xstrain relief assembly
2 xgrommet plugs
1 xRaychem installation instructions


T-100 approvals
Area classificationHazardous area, zone 1, zone 2 (Gas), zone 21, zone 22 (Dust)
ATEX approvalsEx e II PTB 09 ATEX 1043U
ATEX markings Ex II 2G Ex e II
 Ex II 2D Ex tD A21 IP66
 IECEx PTB 09.0023U
 Ex e II
 Ex tD A21 IP66
 DNV Certificate No E-8933 and E-8934
T-100 enclosure details
Enclosure materialEngineered polymers, colour BLACK
Stand materialEngineered polymers, colour BLACK
Ingress protectionIP66, IP67
SealSilicone rubber
ScrewsStainless steel
Operating temperature-50°C to +56°C ambient
T-100 technical specification
Heating cable capabilityRaychem BTV-CR, BTV-CT, QTVR, XTV, KTV and VPL
Entries3 x trace heating cable via stand
Installation temperature-50°C minimum
Operating voltageupto 277 Vac
Max. continuous current40A heating cable circuit for PTB
Weight1.2 kg
  • Raychem T100 installation
    Trace heating - Raychem T-100 connection tee for Raychem BTV, QTVR, XTV, KTV or VPLtrace heating cables in ATEX hazardous areas
  • Raychem T100 datasheet
    Trace heating - Raychem T100 connection tee / splice datasheet