Raychem JBM-100-EP power connection junction box Maximize

Raychem JBM-100-EP power connection junction box

The Raychem JBM-100-EP is a multiple entry power connection junction box with earth plate and stud designed to connect power, via an armoured cable, up to 480 Vac to three Raychem BTV, QTVR, XTV, KTV or VPL industrial parallel trace heating cables. It mounts onto pipe or an appropriate surface directly via and integral stand. It is approved by PTB, FM and CSA, for use in hazardous areas.

More details

The Raychem JBM-100-EP trace heating power connection junctino box kit is designed to connect power to up to three Raychem BTV, QTVR, XTV, KTV or VPL industrial parallel trace heating cables. It is approved by PTB, FM and CSA, for use in hazardous areas.

The Raychem JBM-100-EP integrates the functions of both connection kits and insulation entries for trace heating systems. The rugged stand protects the trace heating cable and allows for up to 100 mm (4") of thermal insulation. The core sealing boot does not require a heat gun or torch for the installation (no hot work permit necessary). The non-curing sealant (silicone free) in the boot allows easy installation and facilitates maintenance.

Innovative CAGE CLAMP® terminals from WAGO provide fast installation and safe, reliable, maintenance-free operation for trace heating systems.

Compared to existing trace heating systems, this connection kit significantly reduces installation time. 

Raychem JBM-100-EP kit includes

1 xjunction box with terminals, earthing plate and external earth stud
1 xstand
1 xcore sealer
1 xgreen/yellow earth sleeve
1 xM25 stopping plug
1 xpolywater sachet
1 xspanner
1 xstrain relief assembly
2 xgrommet plugs
1 xinstallation instruction

 

td colspan="2" valign="top" width="603">JBM-100-EP enclosure details

JBM-100-EP technical details

ATEX area classificationHazardous area, zone 1, zone 2 (Gas), zone 21, zone 22 (Dust)
ATEX approvalsPTB 09 ATEX 1059 U
ATEX markingsEx II 2G Ex e (e mb) II
 Ex II 2D Ex tD (tD mbD) A21 IP66
 IECEx PTB 09.0037U
 Ex e (e mb) II
 Ex tD (tD mbD) A21 IP66
 CSA – Ex e II T*
 DNV Certificate No E-8933 and E-8934
  
Enclosure materialElectrostatic charge-resistant glass filled engineered polymer, colour BLACK
Ingress protectionIP66/IP67
SealSilicone rubber
Lid screwsStainless steel
Earth continuity plateSteel, zinc plated and blue chromate
Operating temperature-50°C to +56°C ambient
  
Raychem JBM-100-EP technical specification
Heating cable capabilityBTV-CR, BTV-CT, QTVR, XTV, KTV & VPL
Entries2 x M25
Installation temperature-50°C minimum
TerminalsSpring-type (2 phase, 2 neutral, 2 earth)
Max. conductor size10 mm² stranded, 10 mm² solid
Max. operating voltage480 Vac
Max. continuous current40A heating cable circuit
Weight2.1 kg