RAYCHEM C25-01 power connection kit, hot applied M25 gland - nVent

nVent Raychem C25-01 connection kit, for BSA and BTV-CR jacket self-regulating heating cables

RAYCHEM C25-01 power connection kit, hot applied M25 gland - nVent

/ ea
reward points

Lead time: 3 to 5 days

Product details

nVent RAYCHEM C25-01 connection kit is for terminating all nVent RAYCHEM BSA and BTV-CR polyolefin jacket self-regulating heating cables to a junction box, whilst maintaining electrical insulation of the cable conductors and core. Ordinary (non-hazardous) areas 

    ApprovednVent RAYCHEM heating cables: BSA, BTV-CR self-regulating
    Typehot applied
    Thread sizeM25 x 1.5
    Max. exposure temperature (gland)+100°C
    Min. ambient temperature-20°C
    Gland materialPolyamide: colour BLACK
    Temperature classificationIP 66
    Weight (kg)0.06

    C25-01 connection kit contents
    M25 x 1.5 polyamide gland1
    Heat shrink sleeves for core sealing2
    Green/yellow tube1

    * IMPORTANT* The above numbers are for circuit length estimation only. For more detailed information please request nVent RAYCHEM TraceCalc software design. nVent requires the use of a 30 mA residual current device to provide maximum safety and protection from fire. Where design results in higher leakage current, the preferred trip level for adjustable devices is 30 mA above any inherent capacitive leakage characteristic of the heater as specified by the trace heater supplier or alternatively, the next common available trip level for non adjustable devices, with a maximum of 300 mA. All safety aspects need to be proven
    DNV TAE00003ES
    When used with BSA, BTV-CR

    Products are in compliance with IEC/EN 62395-1:2013