RAYCHEM E-20 end seal, heat shrink, under insulation use in hazardous and non hazardous areas

nVent Raychem E-20 end seal kit, under insulation, heat applied

RAYCHEM E-20 end seal, heat shrink, under insulation use in hazardous and non hazardous areas


$0.00
$13.41
/ ea
Earn0
reward points


Product details

nVent RAYCHEM E-20 end seal kits. The end seal kit is an easy to use heat shrinkable tubing with an adhesive, that when heated forms a semi-flexible moisture proof encapsulation. The E-20 end seal kit terminates one heating cable and is approved for use in hazardous areas with nVent RAYCHEM BTV and QTVR self-regulating heating cables.

  • Rugged: integral pipe mount stand protects heating cables
  • Simple to design: up to 277 VAC, 40 A
  • Easy to install: re-entrable seal, no hot work permit required
  • Reliable long life: maintenance free, 10 year product warranty available
  • TECHNICAL DETAILS
    SPECIFICATIONS
    ApprovednVent RAYCHEM heating cables: BTV and QTRV self-regulating
    Maximum exposure temperature110°C
    Minimum ambient temperature-60°C
    Minimum installation temperature-25°C
    Gas torch or equivalentminimum 1460 W hot air gun
    E-20 end seal kit contents
    heat shrinkable adhesive sleeve2
    Aluminum foil tape1
    * IMPORTANT* The above numbers are for circuit length estimation only. For more detailed information please request nVent RAYCHEM TraceCalc software design. nVent requires the use of a 30 mA residual current device to provide maximum safety and protection from fire. Where design results in higher leakage current, the preferred trip level for adjustable devices is 30 mA above any inherent capacitive leakage characteristic of the heater as specified by the trace heater supplier or alternatively, the next common available trip level for non adjustable devices, with a maximum of 300 mA. All safety aspects need to be proven


  • DIMENSIONS
    Dimensions and Weight
    Length (mm)
    120
     diameter (mm)
    20
    Weight (kg)
    0.03
  • DOWNLOAD DOCUMENTS