RAYCHEM E-50-F end seal, heat shrink, for FMT and FHT heating cables - nVent

nVent Raychem E-50-F end seal kit for FMT and FHT heating cables. Approved for hazardous areas

RAYCHEM E-50-F end seal, heat shrink, for FMT and FHT heating cables - nVent

/ ea
reward points

Lead time: 3 to 5 days

Product details

nVent RAYCHEM E-50-F end seal kits. The end seal kit is an easy to use heat shrinkable tubing with an adhesive, that when heated forms a semi-flexible moisture proof encapsulation. The E-50-F end seal kit terminates one heating cable and is approved for use in hazardous areas with nVent RAYCHEM FMT and FHT constant wattage heating cables

    ApprovednVent RAYCHEM heating cables: FMT and FHT constant wattage
    Maximum exposure temperature260°C
    Minimum ambient temperature-60°C
    Minimum installation temperature-60°C
    Gas torch or equivalentminimum 3000 W hot air gun
    E-20 end seal kit contents
    heat shrinkable adhesive sleeve2
    * IMPORTANT* The above numbers are for circuit length estimation only. For more detailed information please request nVent RAYCHEM TraceCalc software design. nVent requires the use of a 30 mA residual current device to provide maximum safety and protection from fire. Where design results in higher leakage current, the preferred trip level for adjustable devices is 30 mA above any inherent capacitive leakage characteristic of the heater as specified by the trace heater supplier or alternatively, the next common available trip level for non adjustable devices, with a maximum of 300 mA. All safety aspects need to be proven

    Dimensions and Weight
    Length (mm)
     diameter (mm)
    Weight (kg)