RAYCHEM GL glands for power cable connection, hazardous area

nVent Raychem GL metal glands for power cable connection

RAYCHEM GL glands for power cable connection, hazardous area


$0.00
$35.49
/ ea
Earn0
reward points



Product details

nVent RAYCHEM GL-xx are a range of cable glands for use with various size armoured or non-armoured power cables. The glands are available in different sizes and materials and are approved for use in hazardous areas


  • TECHNICAL DETAILS
    GL series brass nickel plated Ex d IIC
    GlandsnVent RAYCHEM component
    GL-33, 3/4" NPT Raystat EX-02 thermostat
    GL-34, 3/4" NPTRaystat EX-02 thermostat (non-armoured cable)
    GL-38-M25-METAL, M25JBM-100, JBS-100, JBU-100, JB-EX junction boxes earth plate variants
    GL series, polyamide (Ex e II) - for use with non-armoured power cable
    GlandnVent RAYCHEM component
    GL-36-M25JBM-100, JBS-100, JBU-100 junction boxes (cable ⌀8 to 17.5 mm) and temperature range -20°C to +75°C
    GL-45-M32JB-EX-21, JB-EX-32**, JB-MB-25**, JB-MB-26** (cable ⌀12 to 21 mm)
    GL-51-M40JB-Ex-42, JB-EX/21**, JB-Ex-32/**, JB-EX-25/** (cable ⌀17 to 28 mm)
    GL-55-M25JB-EX-20, JBM-100, JB-MB-25**, JB-MB-26**, JBS-100, JBU-100 (cable ⌀8 to 15 mm) and temperature range -55°C to +70°C
    * IMPORTANT* The above numbers are for circuit length estimation only. For more detailed information please request nVent RAYCHEM TraceCalc software design. nVent requires the use of a 30 mA residual current device to provide maximum safety and protection from fire. Where design results in higher leakage current, the preferred trip level for adjustable devices is 30 mA above any inherent capacitive leakage characteristic of the heater as specified by the trace heater supplier or alternatively, the next common available trip level for non adjustable devices, with a maximum of 300 mA. All safety aspects need to be proven
  • DOWNLOAD DOCUMENTS