Raychem JBM-PI-EP integrated power connection junction box for XPI and XPI-S heat trace cables, hazardous and non hazardous areas - chemelex®
Raychem JBM-PI-EP integrated power connection junction box for XPI and XPI-S heat trace cables, hazardous and non hazardous areas - chemelex®
Product details
chemelex® Raychem JBM-PI-EP power connection and junction box with integral pipe mount stand. JBM-PI-EP kit is designed to connect chemelex® Raychem XPI industrial series heating cables directly to a power supply without the use of cold leads and with certain power and current restrictions. Electrostatic charge resistant glass filled engineered polymer enclosure, forms part of the integrated components system and can be either pipe or wall mounted. The JBM-PI-EP connects power to up to 3 heating cables and is approved for use in hazardous areas with chemelex® Raychem XPI & XPI-S polymer insulated series heating cables.
Features & Benefits
- Rugged: integral pipe mount stand protects heating cables
- Simple to design: up to 550 VAC, 45 A continuous
- Easy to install: XPI and XPI-S connect direct, NO cold lead required (** see installation manual for details**)
- Reliable long life: maintenance free, 10 year product warranty available
- TECHNICAL DETAILS
SPECIFICATIONS Approved chemelex® Raychem polymer insulated heating cables: XPI-1000 to XPI-1.8, XPI-S-1000 to XPI-S-1.8 Rated voltage 550 VAC Max. current rating (1) 45 A (continuous)
70 A (start-up)Temperature range -55°C to +56°C Max. continuous pipe temperature 160°C Min. installation temperature -55°C Terminals 16mm² spring type (2) Enclosure material Electrostatic charge resistant glass filled polymer: Colour BLACK Enclosure lid screws stainless steel Enclosure lid gasket silicone rubber Earth continuity plate steel, zinc plated and blue chromated Enclosure entries 1 x M25 threaded (gland not supplied) (3) Temperature classification IP 66 (1) Different current and power restrictions apply for different ambient temperatures, pipe temperatures and cable types
(2) Terminal configurations may not be altered without consent from chemelex®.
(3) Power cable gland minimum required rating 90°CJBM-PI-EP Power Connection Junction Box KitContents JBM-PI-EP junction box with terminals 1 earth continuity plate 1 external earth stud 1 stand 1 skip jumper 1 sealing pins 2 green/yellow earth sleeves 3 grommet (1 pre-mounted for small cables, 1 for large cables) 2 polywater sachet 1 spanner 1 strain relief assembly 1 - APPROVALS
APPROVALS ATEX: PTB20ATEX1011U
Ex II 2 G Ex eb 60079-30-11C T6...T4 Gb
Ex II 2 D Ex tb IIIC T85°C...T135°C DbIECEX: IEC PTB 20.0018X
Ex eb 60079-30-1 IIC T6...T4 Gb
Ex tb IIIC T85°C...T135°C Db - DIMENSIONS
DIMENSIONS AND WEIGHT JBM-100 versionsStand height (mm) 122 Enclosure width (mm) 220 Enclosure height (mm) 120 Enclosure depth (mm) 90 Weight (kg) 1.5 - DOWNLOAD DOCUMENTS